Registered firefighters 1, 2, and 3 equipment contractors
Registered electrical contractor, registered plumbing contractor
Registered minor works contractor (Levels 2 and 3)
Competent persons for mandatory window inspection programs

Print this page

NFS2-640 Intelligent Addressable Fire Alarm System (2 loop)

  • The NFS2-640 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER. In stand-alone or network configurations, ONYX Series products meet virtually every application requirement.
  • The NFS2-640’s modular design makes system planning easier. The panel can be configured with just a few devices for small building applications, or networked with many devices to protect a large campus or a high-rise office block. Simply add additional peripheral equipment to suit the application. A host of other options are available, including single- or multichannel voice; firefighter’s telephone; LED, LCD, or PC-based graphic annunciators; networking; advanced detection products for challenging environments; wireless fire protection; and many additional options.
  • NOTE: Unless called out with a version-specific “E” at the end ofthe part number, “NFS2-640” refers to models NFS2-640 and NFS2-640E; similarly, “CPU2-640” refers to models CPU2-640 and CPU2-640E.

本頁圖片/檔案 - NFS2-640

 

  • Certified for seismic applications when used with the appropriate seismic mounting kit.
  • Approved for Marine applications when used with listed compatible equipment. See DN-60688.• One, expandable to two, isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7.
  • Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See DN-60820.
  • Up to 159 detectors and 159 modules per SLC; 318 devices per loop/636 per FACP or network node.
    – Detectors can be any mix of ion, photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG.
    – Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG.
  • Standard 80-character display, 640-character large display (NCA-2), or display-less (a node on a network).
  •  Network options:
    – High-speed network for up to 200 nodes (NFS2-3030, NFS2- 640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA).
    – Standard network for up to 103 nodes (NFS2-3030, NFS2- 640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/ 400, AFP-1010, and AM2020). Up to 54 nodes when DVCEM is used in network paging.
  •  6.0 A switch mode power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization.
  • Built-in Alarm, Trouble, Security, and Supervisory relays.
  • VeriFire® Tools online or offline programming utility. Upload/ Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware.
  • Autoprogramming and Walk Test reports.
  • Multiple central station communication options:
    – Standard UDACT
    – Internet
    – Internet/GSM
  • 80-character remote annunciators (up to 32).

• EIA-485 annunciators, including custom graphics.
• Printer interface (80-column and 40-column printers).
• History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file.
• Alarm Verification selection per point, with automatic counter.
• Presignal/Positive Alarm Sequence (PAS).
• Silence inhibit and Auto Silence timer options.
• March time/temporal/California two-stage coding/strobe synchronization.
• Field-programmable on panel or on PC, with VeriFire Tools program check, compare, simulate.
• Full QWERTY keypad.
• Battery charger supports 18 – 200 AH batteries.
• Non-alarm points for lower priority functions.
• Remote ACK/Signal Silence/System Reset/Drill via monitor modules.
• Automatic time control functions, with holiday exceptions.
• Surface Mount Technology (SMT) electronics.
• Extensive, built-in transient protection.
• Powerful Boolean logic equations.
• Support for SCS Series smoke control system in HVAC mode.

 

 

SYSTEM CAPACITY
• Intelligent Signaling Line Circuits ..................1 expandable to 2
• Intelligent detectors ............................................... 159 per loop
• Addressable monitor/control modules .................... 159 per loop
• Programmable software zones............................................... 99
• Special programming zones................................................... 14
• LCD annunciators per CPU2-640/-640E and NCA-2 (observe power)................................................... 32
• ACS annunciators per CPU2-640/-640E................................ 32 addresses x 64 points
• ACS annunciators per NCA-2 ....................................... 32 addresses x 64 or 96 points
NOTE: The NCA-2 supports up to 96 annunciator address points per ACM-24AT/-48A.
ELECTRICAL SPECIFICATIONS
Primary input power:
– CPU2-640 board: 120 VAC, 50/60 Hz, 5.0 A.
– CPU2-640E board: 220/240 VAC, 50/60 Hz, 2.5 A.

Current draw (standby/alarm):
– CPU2-640(E) board: 0.250 A. Add 0.035 A for each NAC in use.
– KDM-R2: 0.100 A.
– LEM-320: 0.100 A.
• Total output 24 V power: 6.0 A in alarm.

 

  • UL/ULC Listed: S635.
  •  ULC Listed: S527-11
  • FM Approved.
  • MEA: 128-07-E.
  •  Fire Dept. of New York: #6212.
  •  CSFM: 7165-0028:0243.
  •  City of Chicago.
  •  City and County of Denver.
  •  CCCF listed.