• Four different monitor modules are available for Notifier’s intelligent control panels for a variety of applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors.
• FMM-1(A) is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices.

• Built-in type identification automatically identifies this device as a monitor module to the control panel. Powered directly by two-wire SLC loop. No additional power required.
• High noise (EMF/RFI) immunity.
•  SEMS screws with clamping plates for ease of wiring.
•  Direct-dial entry of address: 01 – 159 on FlashScan loops; 01 – 99 on CLIP loops.
•  LED flashes green during normal operation (programmable option) and latches on steady red to indicate alarm.

Download

FMM-1 Monitor Module

• Nominal operating voltage: 15 to 32 VDC.
• Maximum current draw: 5.0 mA (LED on).
• Average operating current: 375 μA (LED flashing), 1 communication every 5 seconds, 47k EOL.
• Maximum IDC wiring resistance: 1500 Ohms.
• Maximum IDC Voltage: 11 Volts.
• EOL resistance: 47K Ohms.
• Temperature range: 32°F to 120°F (0°C to 49°C).
• Humidity range: 10% to 93% noncondensing.
• Dimensions: 4.5" (11.43 cm) high x 4" (10.16 cm) wide x 1.25" (3.175 cm) deep. Mounts to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep box.

• UL: S635.
• ULC: S635.
• FM Approved.
• CSFM: 7300-0028:0219, 7165-0028:0224, 7165-0028:0243.
• MEA: 457-99-E.
• U.S. Coast Guard: 161.002/50/0 (NFS2-640, NFS2-320, NFS2-3030).
• Lloyd’s Register: 11/600013 (NFS2-640, NFS2-320, NFS2-3030).
• Fire Dept. of New York: COA #6121 (NFS2-640, NFS-320), COA# 6114 (NFS2-3030).